Override Meal Period - TEC FS-3700 R4 Series Owner's Manual

New Check Prompts
3.2.6

Override Meal Period

Meal Periods are set up by time for each day of the week in the Meal Period Setup
table. The current setting can be overridden for the current check only or for all
checks until the System Z report is done. The change can affect one terminal or all
terminals.
For One Check Only
Press a
1. [MEAL PERIOD #]
wanted for this check.

The override setting reverts back to the preset Meal Period after the check
is sent.
For All Checks Today
Press
1.
[STAY
Press the
2.
[MEAL PERIOD #]
Screen prompts:
3.
Broadcast changes?
Press YES for the change to be effective at all stations in the system.
4.
Press NO for the change to affect this station only.

The override setting will be effective until the Meal Period is changed again,
or until the next System Z report is done or the power is cycled.
3-8
key which has been set for the Meal Period
DOWN].
key wanted.
Chapter 3 - Guest Check Functions
FS-3700 R4 Owner's Manual