Toshiba e-studio 165 Operator's Manual page 2

The United States Environmental Protection Agency (EPA) has introduced a voluntary programme, the
S
TAR programme, to encourage the widespread and voluntary use of energy-efficient technologies that enhance
the workplace, improve product performance and prevent pollution. As an
TEC CORPORATION has determined that this copier model meets the
efficiency.
E S
NERGY TAR guidelines for this class of copier require
feature that automatically makes the copier enter the sleep mode after a period of inactivity. The copier must also
automatically change to a 'Low power mode' after a certain period of time since the last usage.
Specifically, this copier complies with the following requirements.
Low power mode:
The equipment automatically enters this mode when a specified period of time (the default setting at the time
of shipment: 15 minutes) has passed since its last use. "Saving energy" appears on the LCD screen.
Sleep mode:
The equipment automatically enters this mode when a specified period of time (the default setting at the time
of shipment: 30 minutes) has passed since its last use. "Sleep mode" appears on the LCD screen.
A maximum of 70 W (in the sleep mode) is provided as standard power consumption in the
The power consumption of this equipment is within the provided one both in the lower power mode and sleep
mode.
Note 1: The period from the last use to the time the equipment enters into the sleep mode or the low power mode
can be changed. See the following page for details:
P.128 "Timer Setting"
Note 2: In the sleep mode, the equipment starts warming itself up when print data are received, or when any
button on the control panel is pressed. When the warm-up has completed, the equipment enters into the
ready status and starts printing out the data.
In accordance with EPA
paper.
Great White MultiUse 20 paper
If you have any questions regarding the use of recycled paper or some recommended types of recycled paper,
please contact your authorized TOSHIBA dealer.
E S
NERGY TAR is a U.S. registered mark.
E S
NERGY TAR programme guidelines, TOSHIBA recommends the following recycled
E S
EPA NERGY
E S
NERGY
TAR ® (MFD)
E S
NERGY TAR Partner, the TOSHIBA
E S
NERGY TAR guidelines for energy
TAR copiers to have a 'Sleep mode'
E
NERGY
E S
NERGY TAR.