Interrupting Copying And Making Another Copy - Interrupt Copy - Toshiba e-studio 165 Operator's Manual

2 HOW TO MAKE COPIES

Interrupting copying and making another copy - Interrupt copy -

You can interrupt scanning or copying of one job and make another copy job (= interrupt copy-
ing). The copy quantity or functions applied to the interrupted job are stored in the memory of
this equipment, so that you will not need to set them again when the interrupted job resumes.
1
Press the [INTERRUPT] button.
The [INTERRUPT] lamp blinks, and the lamp will be fully lit after a while.
The LCD screen shows as follows:
Job interrupted
When the [INTERRUPT] button is pressed during scanning, the [INTERRUPT] lamp
blinks, and then the lamp will be fully lit after the scanning has finished.
2
Replace the original with a new one.
3
Select the copy modes as required, and then press the [START]
button.
Interrupt copying starts.
4
After you have finished interrupt copying, press the [INTERRUPT]
button.
The copying status returns to the one before the interruption.
5
Press the [START] button.
The job interrupted will resume.
58 Making Copies
100% NONSORT
ZOOM FINISHING
1
EDIT