Setting Method With The Sigmawin+ - YASKAWA Sigma-7 Series Product Manual

3.4 Position Correction Table Settings

3.4.3 Setting Method with the SigmaWin+

3.4.3 Setting Method with the SigmaWin+
Use the following procedure to configure the Position Correction Table.
1.
Click the [
maWin+.
2.
Click Position Correction Table Setting in the Menu Dialog Box.
The Position Correction Table Setting Dialog Box will be displayed.
Refer to the following section to initialize the Position Correction Table.
3-8
 Set appropriate values for the correction amounts in the Position Correction Table.
The machine may be damaged if the correction amounts are too large.
] Servo Drive Button in the workspace of the Main Window of the Sig-
Initializing the Position Correction Table on page 3-13
NOTICE