6.2.1 List Of Warnings - YASKAWA Sigma-7 Series Product Manual

6.2 Warning Displays

6.2.1 List of Warnings

Note: Use Pn008 = n.X (Warning Detection Selection) to control warning detection.
However, the following warnings are not affected by the setting of Pn008 = n.X and other parameter
settings are required in addition to Pn008 = n.X
For details, refer to the following manual.
6-38
Σ Σ
-7-Series -7W SERVOPACK with MECHATROLINK-III Communications References Product Manual
(Manual No.: SIEP S800001 29)
Warning
A.911 Pn310 = n.X (Vibration Detection Selection)
–
A.923
(Not affected by the setting of Pn008 = n.X.)
A.930 Pn008 = n.X (Low Battery Voltage Alarm/Warning Selection)
Pn423 = n.X (Speed Ripple Compensation Information Disagreement Warning
A.942
Detection Selection)
A.94A to A.960 and
Pn800=n.X (Warning Check Masks)
A.97A to A.97b
Pn008 = n.X (Function Selection for Undervoltage)
A.971
(Not affected by the setting of Pn008 = n.X.)
Pn00D = n.X (Overtravel Warning Detection Selection)
A.9A0
(Not affected by the setting of Pn008 = n.X.)
A.9b0 Pn00F = n.X (Preventative Maintenance Warning Selection)
Parameters That Must Be Set to Select Warning Detection