Installing An Sfp - Avaya ERS 3500 Series Manual

Installing transceivers and optical components on ethernet routing switch
Hide thumbs Also See for ERS 3500 Series:
Table of Contents

Advertisement

SFP
message and generates a trap. The system maps DDM warning and alarm messages into Warning
and Fatal message categories for system logging purposes. If you activate the ddm-alarm-portdown
option, DDI shuts down the corresponding port if a high or low alarm occurs on the port.
The following table lists and describes the Avaya SFP models the ERS 3500 Series supports. The
SFPs that support DDI are indicated by (DDI) after the ROHS Product Number.
Model
100BASE-FX SFP
1000BASE-T SFP
1000BASE-SX DDI SFP
1000BASE-LX DDI SFP
1000BASE-XD DDI SFP
1000BASE-ZX DDI SFP
1000BASE-BX10 DDI SFP
1000BASE-BX40 DDI SFP
1000BASE-EX DDI SFP
1000BASE–XD DDI CWDM 40
km SFP
1000BASE–ZX DDI CWDM 70
km SFP
1000BASE-XD CWDM SFP
1000BASE-ZX CWDM SFP

Installing an SFP

Install an SFP to provide an interface between the device and the network cable.
Installing Transceivers and Optical Components on Avaya ERS 3500 Series
20
ROHS product number
AA1419074-E6
AA1419043-E6
AA1419048-E6
AA1419049-E6
AA1419050-E6*
AA1419051-E6*
AA1419052-E6*
AA1419069-E6 (10 km at
1310 nm ) and mating pair
AA1419070-E6 (10 km at
1490 nm)
AA1419076-E6 (40 km at
1310 nm) and mating pair
AA1419077-E6 (40 km at
1490 nm)
AA1419071-E6*
AA1419053-E6 to
AA1419060-E6*
AA1419061-E6 to
AA1419068-E6*
AA1419025-E5 to
AA1419032- E5
AA1419033-E5 to
AA1419040- E5
Comments on this document? infodev@avaya.com
Description
1310 nm, 100-Mbps Ethernet, multimode
fiber, duplex LC connector
gigabit Ethernet, RJ-45 connector
850 nm, gigabit Ethernet, duplex LC
connector
1310 nm, gigabit Ethernet, duplex LC
connector
1310 nm, gigabit Ethernet, duplex LC
connector
1550 nm, gigabit Ethernet, duplex LC
connector
1550 nm, gigabit Ethernet, duplex LC
connector
1310 nm (tx) and 1490 nm (rx)
gigabit Ethernet, single-fiber LC connector
1490 nm (tx) 1310 nm (rx)
gigabit Ethernet, single-fiber LC connector
1550 nm, gigabit Ethernet, duplex LC
connector
gigabit Ethernet, duplex LC connector
gigabit Ethernet, duplex LC connector
From 1470 nm to 1610 nm LC connector, up
to 40 km
From 1470 nm to 1610 nm LC connector, up
to 70 km
July 2015

Advertisement

Table of Contents
loading

Table of Contents