Installing An Sfp - Avaya ERS 3500 Series Manual

SFP transceivers
Model
1000BASE-XD-CWDM
1000BASE-ZX-CWDM

Installing an SFP

Before you begin
• Verify that the SFP is the correct model for your network configuration.
• Before you install the optical connector, ensure it is clean.
Warning:
Risk of eye injury by laser
Fiber optic equipment can emit laser or infrared light that can injure your eyes. Never look
into an optical fiber or connector port. Always assume that fiber optic cables connect to a
light source.
20 Installing the SFP, SFP+, and XFP transceivers on Avaya ERS 3500 Series
ROHS product
number
AA1419068-E6 (DDI) 1610 nm, up to 70 km
AA1419025–E5
AA1419026–E5
AA1419027–E5
AA1419028–E5
AA1419029–E5
AA1419030–E5
AA1419031–E5
AA1419032–E5
AA1419033–E5
AA1419034–E5
AA1419035–E5
AA1419036–E5
AA1419037–E5
AA1419038–E5
AA1419039–E5
AA1419040–E5
Comments? infodev@avaya.com
Description
1470 nm, up to 40 km
1490 nm, up to 40 km
1510 nm, up to 40 km
1530 nm, up to 40 km
1550 nm, up to 40 km
1570 nm, up to 40 km
1590 nm, up to 40 km
1610 nm, up to 40 km
1470 nm, up to 70 km
1490 nm, up to 70 km
1510 nm, up to 70 km
1530 nm, up to 70 km
1550 nm, up to 70 km
1570 nm, up to 70 km
1590 nm, up to 70 km
1610 nm, up to 70 km
March 2014