Removing An Sfp - Avaya ERS 3500 Series Manual

Example
Job aid
Depending on the transceiver manufacturer, the SFP+ transceiver uses bail-latch type of locking
and extractor mechanism.
The following figure shows typical mechanism used on SFP+ transceivers; other locking and
extractor mechanisms exist. SFP+ transceivers are similar to SFP transceivers in physical
appearance. In the following figure, the SFP+ transceiver still contains the bore plug. Pull the bail to
release the device.

Removing an SFP+

Remove an SFP+ transceiver to replace it or to commission it elsewhere.
Before you begin
• Wear an antistatic wrist strap.
July 2015 Installing Transceivers and Optical Components on Avaya ERS 3500 Series
Comments on this document? infodev@avaya.com
SFP+ transceivers
39