Avaya ERS 3500 Series Manual page 29

1000BASE-XD DDI 1310 nm SFP specifications
The following table describes the 1000BASE-XD DDI SFP. This SFP operates at 1310 nm and has
a reach of up to 40 km. The part number is AA1419050-E6.
Table 9: 1000BASE-XD DDI 1310 nm SFP specifications
Parameter
Maximum electrical power consumption
Connectors
Cabling
Data rate
Line rate (8B/10B) code
Link optical power budget
Transmitter characteristics
Launch power
Receiver characteristics
Receiver sensitivity
Maximum receiver power
1000BASE-XD DDI 1550 nm SFP specifications
The following table describes the 1000BASE-XD DDI SFP transceiver. This SFP transceiver
operates at 1550 nm and has a reach of up to 40 km. The part number is AA1419051-E6.
This transceiver has been discontinued and is no longer available for purchase. Avaya recommends
AA1419057-E6 as a replacement.
Warning:
Risk of equipment damage
To prevent damage to the optical receiver, ensure that at least 3 dB of attenuation exists
between the transmit and receive ports.
Table 10: 1000BASE-XD DDI 1550 nm SFP transceiver specifications
Parameter
Maximum electrical power consumption
Connectors
Cabling
Data rate
Line rate (8B/10B code)
Link optical power budget
July 2015 Installing Transceivers and Optical Components on Avaya ERS 3500 Series
Comments on this document? infodev@avaya.com
Specifications
1.0 W
Duplex LC
SMF, 9 μm
1.0 Gbps
1.25 Gbps
18 dB
–4.5 to 0 dBm
–22.5 dBm
0 dBm
Specification
1.0 W
Duplex LC
SMF, 9 μm
1.0 Gbps
1.25 Gbps
22 dB
SFP specifications
Table continues...
29