Technical Specifications - Topcom Twintalker 9100 User Manual

13.17 Headset connection
The Twintalker 9100 can be used with an optional external microphone and speaker. The
connector is located under the protective rubber cover on the right side of the unit. To attach
the external speaker/microphone headsets or earpiece, lift the rubber flap on the top of the
unit to expose the connector.
Insert the appropriate plug into the connector.
13.18 Panic button
Press the Panic button (2) on top of the unit in case of emergency. A very high alert tone will
be audible.
13.19 Car Charger
When using the enclosed rechargeable battery pack you can use the enclosed car-charger
(12V DC / 200mA) to charge.
• Plug the small plug of the adapter into the Car charger connector (3) and the other end
in the car cigarette plug.
NOTE: It takes approximately 7 to 10 hours to fully charge the batteries.
Do not charge this unit when regular "AAA" alkaline batteries are
installed.
Only use the included car charger. Using another charger will result in
non-compliancy the safety regulation and will invalidate any approval/
warranty for this product.

14 Technical specifications

PMR
Channels
CTCSS
Frequency
Range
Batteries PMR
Transmission Power
Modulation Type
Channel spacing
Topcom Twintalker 9100
8
38
446.00625MHz - 446.09375 MHz
Up to 9 Km (Open field)
3 x AAA Alkaline or NiMh rechargeable battery
pack
=< 500mW ERP
FM - F3E
12,5 Khz
Topcom Twintalker 9100
13