Topcom Twintalker 9100 User Manual page 12

Topcom Twintalker 9100
13.13 Roger Beep On/Off
After the - button is released, the unit will send out a roger beep to confirm that you have
PTT
stopped talking.
To set the Roger Beep.
• Press
• Press
• Press
13.14 Key-Tone On/Off
When a button is pressed, the unit will beep briefly.
To set the key-tone.
• Press
• Press
• Press
13.15 Dual Channel Monitor function
In stand-by, the PMR is set on one set channel with CTCSS code. The PMR will only receive
signals transmitted on that channel and CTCSS code.
Dual Channel Monitor allows you to monitor a second channel with CTCSS code.
• Press
• Press
• Press
SUB-CHANNEL SELECTION
• Press
• Press
To disable the function select 'OFF' when setting the channel.
When the Dual Channel Monitor function is activated, the PMR will switch sequentially
between the standby channel + CTCSS and the Dual Channel + CTCSS.
13.16 Button Lock
• Press and hold
LOCK mode. The BUTTON LOCK icon is displayed on the LCD Screen.
• Press and hold
12
6 times. 'ro' will be displayed.
to enable (ON) or
to confirm your selection and return to the standby mode.
PTT
7 times. 'to' will be displayed.
to enable (ON) or
to confirm your selection and return to the standby mode.
PTT
8 times, DCM OFF appears on the display.
or to change the channel.
to confirm the channel selection and go to CTCSS
or to change the CTCSS.
to confirm.
PTT
for 5 seconds to activate or deactivate the BUTTON
again to deactivate BUTTON LOCK
disable the Roger-Beep (OF).
disable the key Tones (OF).
Topcom Twintalker 9100