Table of Contents
Advertisement
Programming your telephone
For example, in the following example, a USB headset and a jack headset are connected. The default
headset is the one connected to the jack connector.
Default device
If you have connected the same type of accessory onto different connectors (for example, one headset
to the jack connector, one headset to the USB connector and one Bluetooth® headset), the list of used
connectors is display for each type of accessory. You can select your preferred accessory to be used as
the default accessory.
•
Or
(long press)
•
Devices
•
The list of connected devices is displayed.
•
Select the device with more than one connector icons.
•
Select your preferred accessory
•
Activating/Deactivating 'Forced headset' mode
Forced headset mode must be activated as soon as a headset is installed instead of the handset.
•
Reach the 'Menu' page.
•
Settings Phone ForcedHead
•
ON/OFF
Activating/deactivating forced headset.
Installing and using an ALE Bluetooth® wireless handset
This feature is only available with compatible Bluetooth® desk phone. Two Bluetooth® handsets are
provided by ALE International.
Please consult the following chapter depending on the handset in your possession (grey or color
buttons):
•
ALE Wideband Bluetooth® Handset.
•
ALE Bluetooth® Handset.
Installing a Bluetooth® Wireless Technology headset (pairing)
This feature is only available with compatible Bluetooth® desk phone. Otherwise the corresponding
menu is not displayed or is inactive.
A multi-point Bluetooth® headset can be provided by ALE International.
This headset can be paired to your mobile phone and other communication devices at the same time.
For example, you can use the headset paired to your mobile and when you enter your office the headset
automatically matches to your office set too.
You can then answer a call using your Bluetooth® headset or the Bluetooth® Handset on the office set.
8AL90340ENADed01
AudioHub
89 /115
Hide quick links:
Advertisement
Table of Contents
