Alcatel-Lucent OXO Connect 8078s User Manual page 103

Accessories
8018 DeskPhone
1. Drill two holes on the wall
(separation=90mm, diameter=6mm).
2. Insert the fastener into the holes on wall
(P/N: 1AD007550003).
3. Fix the support with both screws and
adjust (P/N: 1 1AD007460003). The
support is used as a reference and must
be removeable.
1. Fix the support with the phone by 1
screw (P/N: 1AD204430001).
2. Connect cables through the hole on
support bottom side.
To make sure that the handset is properly
hung up when the phone is attached to the
wall, place the clip in a wall-mount
configuration (arrows up), as shown in the
following illustration: remove the hook from its
location, turn it over if necessary and replace it
in its location.
8AL90340ENADed01
1. Put the support on the back side of the phone.
2. Slide it from top side and make sure the 2
snaps are engaged on the shell.
1. Hang the assembled phone with support on
the wall (P/N: 1AB045210162).
103 /115