Table of Contents
Advertisement
replace the oldest calls in the memory. The symbol
read or not answered. If the Call List is empty and you press the Up key
will sound.
You can view the information of an incoming call as follows:
•
Press the Up key
•
Press the Up key
memory) of the caller, the sequence number of the call in the Call List, the date and time
of the call appear on the display.
•
Press the Down key
5.1
Setting the date and time
When you receive an incoming call and the date and time are not sent together with the
telephone number or PC TIME (see "PC TIME Settings" on page 29) is not On, this means
that the date and the time will not be shown on the display. By setting the date and time, they
will be shown on the display, together with the telephone number, every time a call comes in !
•
Press the Programming key
•
Press the Up or Down key
•
Press the Programming key
•
'DATE/TIME' appears on the display.
•
Press the Programming key
•
When 'YEAR' appears on the display, enter the 2 last numbers of the year (00=2000,
01=2001, ...) and press the Programming key
•
When 'MONTH' appears on the display, enter the month (01=January, 02=February, ...)
and press the Programming key
•
When 'DAY' appears on the display, enter the day of the month and press the
Programming key to confirm.
•
When 'HOUR' appears on the display, enter the current hour (in 24h format) and press
the Programming key
•
When 'MINUTES' appears on the display, enter the minutes and press the Programming
key
to confirm.
The date and time are now set !
5.2
The Call List
The calls received are stored in the Call List (max. 30 numbers).
•
Briefly press the Up key
•
Select 'CLIP' and press OK
•
The name of the most recent caller appears on the display. If no name is available, 'NO
NAME' appears on the display.
•
If it is a private number, 'UNAVAL' appears on the display.
•
The date and time the call was received are linked to each call.
•
Briefly press the Down key
•
Briefly press the Down key
Topcom Butler 4812 USB VoIP
, select 'CLIP' and press OK
. The name (if sent by the network or present in the Phone Book
. The telephone number of the caller appears on the display.
.
a few times until 'SETTING' appears on the display.
.
again.
to confirm.
to confirm.
to view the most recent call.
to view the telephone number of the call.
to browse other numbers on the list.
Topcom Butler 4812 USB VoIP
on the display blinks if the call is not
to confirm.
, three beep tones
25
Advertisement
Table of Contents
