Appendix C: Troubleshooting; Table 31: Displayed Messages - Motorola MTM800 FuG Feature User Manual

Mobile release 19
Hide thumbs Also See for MTM800 FuG:
Table of Contents

Advertisement

68015000585-MF

Appendix C: Troubleshooting

Appendix C
Troubleshooting
Your radio displays the following messages:

Table 31: Displayed Messages

Message
Attachment Failed
Authenticate Failure
Call Cancelled
Call Ended
Call Forwarding
Call Modified
Call Preempted
Decryption Failed:
Emergency In Use
Wait For Mic
Emgcy Mic Ended
Emergency Mic On
Empty Entry
Faulty Unit
Error
Gateway available
Gateway not available
This group already exists
150
Message Description
Your radio could not perform talkgroup attachment. It
keeps on trying. If it does not succeed, try another talk-
group.
Your radio could not register on an authenticated system
(for example, the Authentication Key is incorrect, or au-
thentication is disabled).
You have canceled the call.
Faulty channel. Please try later.
You have ended the call.
The radio you are trying to call is not available and the call
is being forwarded to another radio.
The call you are participating in has been modified.
Channel being used for priority.
An error occurred while decrypting a message or call.
The Hot Microphone feature is active, but the channel
transmit grant has been given to another Emergency call
on the same talkgroup. Your radio microphone is not ac-
tive during this time, but it automatically tries to regain talk
permit after a predetermined time.
The Hot Microphone timer automatically expired, or you
pressed the PTT button to cancel the Hot Microphone fea-
ture.
The Hot Microphone feature is active, and your radio is au-
tomatically transmitting hands free emergency audio.
The speed number you dialed does not exist, or the num-
ber exists but the group is non-selectable.
Self-test failed. An operational fault has been detected with
your radio. Record the error number. Turn your radio off
and contact service.
Your radio has connected to a gateway.
Your radio cannot connect to a gateway, or connection has
been lost.
The group you are attempting to add exists in the My
Groups folder.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mtm800 fug et

Table of Contents