Motorola MTM800 FuG Feature User Manual page 155

Call Type Answering Method
FDPC / Press PTT on the handset (On
Phone / hook).
PABX and
Press PTT on the handset (Off
HDPC
hook).
Press PTT on the handheld
microphone (On / Off hook).
Press PTT on the hands-free
microphone.
Press external PTT, when
Line-in rear accessory is con-
figured by your service provid-
er.
Press PTT on the HSM.
Press PTT on the GCAI head-
set / PHF.
HDPC auto-answer.
5
Available only for radios with Dual Control Head feature enabled. There is only one receiving
audio path on the control head (front-head GCAI OR back-head GCAI OR external speaker). In
case both the handset and external speaker are connected to control head, handset shall have
a priority for receiving audio if it is taken off hook.
Appendix D: Audio Routing and PTT Hook Interactions
Audio Routing
• To one of the following routes, by priority:
- To the IMPRES handset earpiece if the
IMPRES handset is taken off hook.
- To the HSM / HSM2 earpiece if the
HSM / HSM2 is connected to the control
head.
- To the GCAI headset / PHF earpiece if
the GCAI headset / PHF is connected to
the control head.
- To the external speaker.
To the external speaker.
To the handset PTT is pressed.
To the handheld microphone PTT is pressed.
To the hands-free microphone associated with
the pressed PTT.
To the line-in and to the external speaker.
To the HSM PTT is pressed.
To the GCAI headset / PHF PTT is pressed.
Routing is as follows:
• To the external speaker on the transceiver.
• To the handset of the transceiver if taken off
hook.
• To one of the following routes, by priority:
- To the IMPRES handset earpiece if the
IMPRES handset is taken off hook.
- To the HSM / HSM2 earpiece if the
HSM / HSM2 is connected to the control
head.
- To the GCAI headset / PHF earpiece if
the GCAI headset / PHF is connected to
the control head.
- To the external speaker.
68015000585-MF
5
5
155