Motorola MTM800 FuG Feature User Manual page 36

68015000585-MF
Chapter 2: Getting Started
Icon Description
WAP Message Title Icon – Displayed next to the title along with the text in the mes-
sage list view.
Keys Locked – Indicates that keys are locked.
Non-Secured Call – Air Encryption Unavailable
Blinking – Indicates that Air Encryption is not available when the radio:
• is in the Local Site Trunking Mode.
• attempts to connect to a gateway.
Non-Secured Call – Air Encryption Unavailable
Blinking – Indicates that Air Encryption is not available in DMO Mode. The icon ap-
pears after the PTT button is pressed.
Remote Control – Indicates that the radio is being remotely controlled and some
commands are being executed in the background. For example, when the radio is
being controlled by special SDS messages or triggered to send a GNSS location re-
port.
Radio Selection – Indicates that the next available radio is selected.
Enhanced Dual Control Head
Dual Control Head – Indicates that Dual Control Head feature is enabled, and both
control heads are connected to the transceiver.
Single Control Head – Indicates that Dual Control Head feature is enabled, but only
one control head is connected to the transceiver.
Link Error – Indicates that connection between the control head and the transceiver
has been lost, for example, due to an error.
Key Press Token – Indicates that one of the control heads reserves the key press
token.
CH1 – Indicates that particular activities or settings apply to Control Head 1. Control
Head 1 is a control head connected to port 1 on the expansion head.
CH2 – Indicates that particular activities or settings apply to Control Head 2. Control
Head 2 is a control head connected to port 2 on the expansion head.
Speaker 1 Off (Low Audio) – Indicates that audio will not sound through the speaker
of the Control Head 1.
Speaker 2 Off (Low Audio) – Indicates that audio will not sound through the speaker
of the Control Head 2.
Speakers Off (Low Audio) – Indicates that speakers of both control heads are off.
All Tones Off / Duplex and Simplex Ring Muted – Indicates that all alert tones are
off, or both simplex ring volume is set to 0 and duplex ring volume is set to 0. Appli-
cable to Control Head 1.
Simplex Ring Muted – Indicates that simplex ring volume is set to 0 and duplex ring
volume is set to more than 0. Applicable to Control Head 1.
Duplex Ring Muted – Indicates that duplex ring volume is set to 0 and simplex ring
volume is set to more than 0. Applicable to Control Head 1.
36