Icon
Description
All Tones Off / Duplex and Simplex Ring Muted – Indicates that all alert tones are
off, or both simplex ring volume is set to 0 and duplex ring volume is set to 0. Appli-
cable to Control Head 2.
Simplex Ring Muted – Indicates that simplex ring volume is set to 0 and duplex ring
volume is set to more than 0. Applicable to Control Head 2.
Duplex Ring Muted – Indicates that duplex ring volume is set to 0 and simplex ring
volume is set to more than 0. Applicable to Control Head 2.
2.10
During a Call
During the call, label of the right Soft key indicates the next possible change. Accessory default setup
is:
Table 12: During the Call
Soft Key Label
Spkr
Erpce
2.11
Selecting Talkgroups
Follow these procedures to select talkgroup manually. If the selected talkgroups is an InterSystem
Interface (ISI) talkgroup, your radio can migrate to another talkgroup linked network, changing the
talkgroup automatically.
Procedure:
From the home screen, use one of the following methods:
•
Press Left or Right Navigation key. Press Select to confirm.
•
Select Options → TG by abc. Enter a talkgroup name and select the talkgroup name from the
list.
•
Select Options → TG by Folder. Select a folder (for example, Favorite) and then a talkgroup
name.
NOTICE: Your radio can access up to three levels of the folder structure.
•
Press Rotary Knob and rotate it until the required talkgroup name is displayed. Press Select to
confirm.
NOTICE: If the Rotary Knob mode is set to Scroll, then you do not need to press it to
enter the scrolling mode.
2.11.1
Talkgroup Icons Selection
Talkgroup icons are used to indicate that a talkgroup has a special function, show the status of network
selection, and/or show the talkgroup properties. A talkgroup without an icon does not have a special
function attached to it.
Audio Setting
Audio goes to the main speaker (Speaker HIGH is displayed)
Audio goes to the earpiece (Speaker LOW is displayed)
68015000585-MF
Chapter 2: Getting Started
37