• When entering a percentage ratio, you can specify any value in the permitted range, regardless of
original or copy paper size. However, depending on settings and other conditions, part of the image
may not be copied, or margins will appear on copies.
Specifying the ratio with [ ] and [ ]
Specify a ratio using [ ] and [ ].
1.
Press [Reduce / Enlarge].
2.
Press [Direct. Mag. %].
3.
Press [[ ] [ ] keys].
4.
Press [Horizontal].
5.
Adjust the ratio using [ ] and [ ].
Pressing [ ] or [ ] changes the ratio in increments of 1%. Pressing and holding down [ ] or [ ]
changes it in increments of 10%.
6.
Press [Vertical].
7.
Adjust the ratio with [ ] and [ ].
8.
Press [OK] twice.
• To change the value you entered, readjust it with [ ] and [ ].
Advanced Reduce/Enlarge Copying
4
135