IBM xSeries 455 Installation Manual page 46

connectors, see "RXE Management cabling" on page 35.
Notes:
1. You can connect a remote I/O enclosure to both nodes of a two-node
2. You can connect a remote I/O enclosure to nodes 1 and 2 or nodes 3 and 4 of
1. Remove the protective covers from the connectors on the ends of the cables.
34
xSeries 455: Installation Guide
configuration. If the remote I/O enclosure has only one expansion kit installed,
you can connect the RXE Expansion Port A connector on the primary server to
the remote I/O enclosure.
a four-node configuration. You can also connect remote I/O enclosures to both
nodes 1 and 2 and nodes 3 and 4 of a four-node configuration.
Protective cover