IBM xSeries 455 Installation Manual page 27

Hide thumbs Also See for xSeries 455:

Table of Contents

5. Lift the retention bracket from the server.

6. Loosen the blue thumbscrews securing the EMC shield; then, remove the EMC

shield from the server.

Thumbscrews

7. Remove the processor-board assembly from the server.

Attention:

When you handle static-sensitive devices, take precautions to

avoid damage from static electricity. For details about handling these devices,

see "Handling static-sensitive devices" on page 8.

a. Press to unlock the levers securing the processor-board assembly and pull

up on the levers to release the processor-board assembly.

b. Carefully remove the processor-board assembly from the server and place

it on a flat, non-conductive, level surface.

Lift tabs

Shipping

thumbscrews

Chapter 2. Installing options

Table of Contents