IBM xSeries 455 Installation Manual page 43

Protective cover
2. Using an RXE Expansion cable, connect one end of the cable to the RXE
Expansion Port A connector on the server.
3. Connect the opposite end of the cable to an RXE Expansion Port connector on
the remote I/O enclosure.
Go to "RXE Management cabling" on page 35.
Complete the following steps to connect the server to a remote I/O enclosure with
two expansion kits installed.
RXE Expansion Port B
connector
RXE Expansion Port connectors
xSeries 455
RXE-100
RXE Expansion
Port A
connector
Chapter 2. Installing options
31