IBM xSeries 455 Installation Manual page 28

16
xSeries 455: Installation Guide
8. If you are installing a new microprocessor, go to step 9 on page 17; otherwise,
continue.
Attention: Failure to complete the instructions in the prescribed order might
cause damage to the microprocessor pins and cause the microprocessor to
fail.
Microprocessor
Power module
a. Using the T-handled Torx wrench provided with the microprocessor option,
completely loosen the power-module screws.
b. Slide the power module from the microprocessor and remove the power
module.
c. Completely loosen the heat-sink screws.
Levers