IBM 3745 Series Connection And Integration Manual page 42

o
o
o
Unplugging LlC types 5 and 6 Cable
Refer to the LICSI6 Migration and Integration Guide, SA33-0416 or
earlier version of the Connection and Integration Guide, SA33-0129.
If you are only unplugging a
Lie
cable, go to Step 10 on page 1-25.
If you are
only plugging in
Lie
cable without removing
Lie,
go to Step
8 on page 1-22.
Otherwise, to remove LlC, continue with the next step.
Step
6 Removing LIC
Repeat this step for every
Lie
to be removed.
a. Turn the knob counterclockwise to unlock the
Lie.
b. Remove the
Lie
by delicately pulling it out.
If you have
no LlCs
to
install,
go to Step 10 on page 1-25.
o
Otherwise, continue with the next step.
o
Step
7 Inserting LlC
a. Ensure that the slot is clear. If necessary, carefully remove the
bundle of cables for this
Lie
row from behind the cable retaining
bracket (Do not forget to replace the cables behind the retaining
bracket when finished).
b. Hold the
LIe
so that the black plastic side is on the left and the
knob is pointing toward you.
c. Push the
Lie
into the slot until it clicks.
d. Turn the knob clockwise to lock the
Lie
in place.
For
Lie
types 5 and 6, refer to the LlCSI6 Migration and Integration
Guide, SA33-0416 or earlier version of the Connection and Integration
Guide, SA33-0129.
Chapter 1. 3745 Models 210 to 61A: Connecting lICs and Cables
1-21