IBM 3745 Series Connection And Integration Manual page 112

o
o
o
o
o
Step 24
Select an option:
CD
or
0
or
CD
Note: Use the REPLACE LlCoption, if you:
• Removed a LlC and then installed a different type of LlC in the
same slot
• Changed a LlCcable.
Step 25
Enter the L1C position number from the plugging sheet:
o
0
(Enter
I
Wait until you get the message: ,
CDF LIC CHANGE COMPLETED
Step 26
If you want to:
• Display or update more LlC information, return to Step 21 on
page 5-12.
• Continue the update without making any more changes, go to Step
30 on page 5-14.
• Quit this procedure without saving any changes you may have
made:
§]
You have finished this procedure, do no more Steps. Continue with
other integration procedures.
Note: You must do "Saving 'MOSS from Fixed Disk onto Diskettes"
, on page 5-19 when you have finished all other integration
procedures.
Step
27
§]
and select one of the following:
• To update the HSS line parameters:
CD (
Enter)
• To update the HSS cable information:
o
I
Enter
I
• To make no changes, continue with the next step.
Step 28
Press
§J
repeatedly until you reach the screen:
CDF DISPLAY/UPDATE: LINE ADAPTERS
Step 29
Repeat Steps 21 to 28 for each HSS to be displayed or updated.
Chapter 5. Integration Procedures
5-13