IBM 3745 Series Connection And Integration Manual page 114

0 Step 3
If you only want to see the passwords without changing them:
o (
Enter
I
Otherwise, go to Step 5.
Step 4
§]
Step
5
If you want to change a non-maintenance password:
CD
or
CD
or
CD
then
8
..
Continue with the next step .
Otherwise, go to Step 13 on page 5-16.
Step
6
A password consists of five to eight alphanumeric characters. Do not
use blanks. Enter the new password and keep a record of it:
C
Type in your password and press
I
Enter
I
.
If you make a mistake, you see an error message. You can try again
on the same screen. Refer to the Advanced Operations Guide,
SA33-0097, for a description of error messages.
Step 7
§]
Step
8
Repeat Steps 5 to 7 for each non-maintenance password to be
changed.
0
Step
9
If you want to change the maintenance password:
0
Continue with the next step.
Otherwise, go to Step 13.
Step 10
A password consists of five to eight alphanumeric characters. Do not
use blanks. Enter the new maintenance password and keep a record of
it:
0
Type in your password and press
8
If you make a mistake, you see an error message. You can try again
on the same screen. Refer to the Advanced Operations Guide,
SA33-0097, for· a description of error messages.
Step
11
If you want to choose the Modem Transmission Mode for RSF console:
§J
Otherwise, go to Step 13 on page 5-16.
o
Chapter 5. Integration Procedures
5-15