Stamina 35-1052 Owner's Manual page 11

ASSEMBLY INSTRUCTIONS
STEP 6
Unfold the HANDLEBARS(17, 18) and the EXTENSION ARMS(14) as shown in the illustration. Attach the
EXTENSION ARMS(14) to the PIVOT CONNECTOR(10) with the LOCKING KNOBS(13).
STEP 7
Install two AAA batteries into the METER(37), the batteries are not included. See page 14 for detailed battery
installation instructions. Connect the EXTENSION WIRE(39) to the METER(37). Attach the METER(37) to
the plate on the METER POST(31) with ROUND HEAD SCREWS(M5x0.8x12mm)(49).
11