Tiger JD 5083E Mounting And Operating Instructions page 89

GREASING PIVOT POINTS - BOOM AND SWIVEL
Locate grease zerks (8) on deck pivot assembly, (2) on deck end of secondary
boom, (2) at main / secondary boom joint, and (2) at swivel end of main boom. Inject
Lithium-Complex Extreme Pressure grease conforming to NLGI2-ISO 320
specifications until grease begins to protrude from ends every 8 hours or daily.
Locate grease fitting on inside of deck housing. Inject Tiger Spindle Lubricant,
part number 06540000 into spindle housing. Fill with lubricant until lubricant weeps
out of the top spindle seal. Lubricate spindle weekly or every 40 hours of use.
MAINTENANCE
GREASING SPINDLE
Cheetah Maintenance Section 4-11