Tiger JD 5083E Mounting And Operating Instructions page 64

Cheetah boom assemblies
Hide thumbs Also See for JD 5083E:
Table of Contents

Advertisement

JOYSTICK CONTROL SWITCH BOX
MOWER RUN
INDICATOR LIGHT
MOWER CONTROL
SWITCH
The Mower Control switch turns the mower "ON" and "OFF. This switch is to be
in the "OFF" position to start the tractor. If the switch is "ON" and the tractor ignition
switch is turned to "ON" the red "mower run" indicator light will come on. However,
the tractor will not start with the Mower Control switch in the "ON" position. Upon
starting tractor the "mower run" indicator light may flash briefly, and may flash briefly
again when tractor is shut down.
If tractor starts with switch on, turn off tractor and contact
your local Tiger dealership for assistance.
NOTE: DO NOT operate mower head while boom mower is in the boom
rest! Red "Mower Run" light indicates mower is "ON" when tractor
engine is running.
The boom functions are controlled by an electronic joystick. The Joystick Master
Switch enables the joystick control for controlling the boom motion functions. This
switch is to be in the "OFF" position to start the tractor and when boom is stowed for
transporting the machine. The tractor will not start with the switch in the "on" position.
If the joystick control is not operating properly, turn the master switch to
the "OFF" position. Install the manual valve handle onto valve and
operate the functions individually to stow boom. After boom is stowed in
rest, transport the unit to the maintenance facility and contact your Tiger
dealer for assistance.
DO NOT attempt to operate the valve manually for mowing operations!
OPERATION
JOYSTICK MASTER
SWITCH
Cheetah Operation Section 3-4
SAFETY SHIELD
SWITCH
TRAVEL LOCK
DECK FLOAT
SWITCH
SWITCH

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents