Tiger JD 5083E Mounting And Operating Instructions page 65

Note: Pushing manual valve handles "out" or "away" from the tractor cab will
bring the main boom "up", secondary boom "out", roll deck "out", and swivel boom
"aft". Pulling manual handles toward cab will let main boom "down", bring secondary
boom "in", roll deck "in", swivel boom "forward", and close the safety shield.
The Safety Shield switch opens and closes the shield located on the front of the
cutter head. When mowing at or near the ground, always have the shield in the
closed position. When mowing in brush or in trees above ground level the shield
may be opened for easier cutting. Read and follow the warnings on the decal shown
below. Do not run the cutter head into material larger than 6" diameter.
OPERATION
Cheetah Operation Section 3-5