Daikin FTX-N Series Service Manual page 52

Functions for FTX, FVXS Series
FVXS series
Upward airflow
Upward airflow
3-D Airflow
FTX18/24UVJU only
Alternative repetition of vertical and horizontal swing motions enables uniform air-conditioning of
the entire room.
When the horizontal swing and vertical swing are both set to automatic operation, the airflow
becomes 3-D airflow. The horizontal and vertical swing motions are alternated and the airflow
direction changes in the order shown in the following diagram.
(1) The vertical blades (louvers) move from the right to the left.
(2) The horizontal blades (flaps) move downward.
(3) The vertical blades (louvers) move from the left to the right.
(4) The horizontal blades (flaps) move upward.
Airflow Selection FVXS Series
Airflow direction can be set with the airflow selection switch.
Setting
 Open the front panel.
Caution
Before opening the front panel, be sure to stop the operation and turn the breaker off.
Do not touch the aluminum fins (indoor heat exchanger) inside the indoor unit, as it may result in
injury.
47
Flap (up and down)
Cooling/Dry
limit OFF
limit ON
Front panel
Heating
R4003397
R4003396
R4003394 R4003394
(1)
(2)
(3)
„
„
(4)
(R19554)
Air is blown from the upper outlet only.
The blow pattern is automatically decided
depending on mode and conditions.
(Recommended and factory set.)
Part 4 Functions and Control
SiUS091601EA
(R17866)