Daikin FTX-N Series Service Manual page 209

SiUS091601EA
1. Set to COOL or HEAT operation using the
2. Press and hold Cancel button for 4 seconds
3. Select
4. Press On/Off button within 10 seconds, and
5. Press and hold Cancel button for 4 seconds
6. Select
Part 7 Trial Operation and Field Settings
Wired Remote Controller (BRC1E73)
remote controller.
or longer. Service settings menu is
displayed.
Test Operation
settings menu, and press Menu/OK button.
Basic screen returns and "Test Operation"
is displayed at the bottom.
the test operation starts.
Monitor the operation of the indoor unit for a
minimum of 10 minutes. During test
operation, the indoor unit will continue to
cool/heat regardless of the temperature
setpoint and room temperature.
In the case of above-mentioned
procedures 3 and 4 in reverse order, test
operation can start as well.
or longer in the basic screen.
Service settings menu is displayed.
Test Operation
settings menu, and press Menu/OK button.
Basic screen returns and normal operation
is conducted.
Test operation will stop automatically
after 15 ~ 30 minutes. To stop the
operation, press On/Off button.
Wireless Remote Controller (BRC082A43)
1. Press button and select the COOL or HEAT operation.
2. Press button twice. "TEST" is displayed.
3. Press button within 10 seconds, and the test operation starts.
Monitor the operation of the indoor unit for a minimum of 10 minutes. During test operation,
the indoor unit will continue to cool/heat regardless of the temperature setpoint and room
temperature.
In the case of above-mentioned procedures (1) and (2) in reverse order, test operation
can start as well.
Test operation will stop automatically after 15 ~ 30 minutes.
To stop the operation, press
Some of the functions cannot be used in the test operation mode.
Basic screen
1.
2.
Cool
Service Settings
in the service
3.
4.
5.
in the service
6.
Basic screen
button.
Set to
68
Press and hold Cancel
F
button for 4 seconds or
longer during backlight lit.
menu screen
Press Menu/OK button.
Press On/Off button
(within 10 seconds).
Press and hold Cancel
button for 4 seconds or
longer during backlight lit.
Press Menu/OK button.
Trial Operation
204