Ntp & Time Settings; To Activate The Vlan Settings; To Synchronize Clock With The Ntp Server; To Configure Date And Time Manually - NEC GT200 User Manual

VLAN Setting

To activate the VLAN settings:

1. Select Enable for Activation.
2. The Identifier and Priority fields are enabled for user input. Enter the required information.
3. Click Submit to save your settings or Reset to cancel.
NTP & Time Settings
The NTP & Time Setting enables you to configure the date and time of the VoIP phone manually or synchronize the clock
with the NTP (Network Time Protocol) server, and specify the time zone you are in. The NTP function should be disabled if
you want to set the date and time manually.
Note: The SV systems cannot be used as the NTP server.
To access NTP & Time settings, click Network, NTP Settings. The following screen will be displayed.

To synchronize clock with the NTP server:

1.
Choose Enable to enable NTP and enter the server information provided by your ITSP or MIS.
2.
From Location, select the time zone you are in.
3. Choose Sync. time to synchronize with NTP server.
4. Click Submit to save your settings or Reset to cancel.

To configure date and time manually:

1.
Choose Disable to disable NTP.
2. Enter the date and time manually on the Set System Time fields.
3. Click Submit to save your settings or Reset to cancel.
Chapter 4 Web Configuration
34