Table of Contents
Advertisement
Reg. Server: Input the registration server IP address, "(IP Address of SV8100): (port number)", a port number
is necessary, and default value of SV8100 is "5070"
Registration Server port: Input the registration server port
Proxy Server: Input the proxy server IP address.
Proxy Server Port: Input the proxy port number.
Proxy Address: Input the outbound proxy server IP address.
Proxy Address Port: Input the proxy port number
Voice Mail: Input the number to dial the voice mail system.
SRTP: Select "Disable", SRTP is not supported on SV8100.
Expire time: User can set the timeout duration for registration request, it should be "120" or more.
DTMF Type: Input the DTMF type options: RFC2833 / SIP INFO / In-Band
Retry Expire Time: User can set the timeout duration for registration failed retry request.
Send Keep Alive: On/Off. Typically enabled to instruct the phone to send SIP keep-alive message for
maintaining a "pinhole" in the user's firewall through which SIP messages can pass.
MWI: Enable / Disable to ask server auto provide Message Waiting Indicator.
Subscribe Expire Time: User can set the timeout duration for subscribe request.
Status: Displays the status of the SIP Account.
3.
Click Submit to confirm your settings or Cancel to cancel.
Note: A maximum of ten SIP accounts can be registered. However, you will always call out with the first account number registered.
N
e
t
w
o
r
k
N
e
t
w
o
r
k
Network menu allows you to view and setup LAN port, NTP and Time settings, IP mapping, and routing table settings.
Status
You can view the LAN Port information from the Status submenu.
Click Network, Status. The following screen will be displayed.
Chapter 4 Web Configuration
32
Hide quick links:
Advertisement
Table of Contents
