Ntp Setting; Ntp Server - NEC MH240 User Manual

• NTP SETTING

Factory Default: Disable
You can use NTP server in your network as
required.
- Press the key while in Standby mode.
Your phone displays the main menu.
- Press the key to select "5.Setting" and
then press the
- Press the key to select "1.User Setting"
and then press the
- Press the key to select "7.Date & Time"
and then press the
- Press the key to select "5.NTP Setting"
and then press the
- Press the key to select "1.Disable" or
"2.Enable" and then press the "OK" soft
key.
NTP Setting
1.Disable
2.Enable
OK
Please confirm
TIP
administrator whether you can use

NTP Server.

You can reach the NTP Setting
TIP
menu by pressing the following
keys.
To go to the NTP Setting menu:
key.
key.
key.
key.
Back
your network
• NTP SERVER
Factory Default: -
You can set a NTP server in your network as
required.
- Press the
Your phone displays the main menu.
- Press the
then press the
- Press the
and then press the
- Press the
and then press the
- Press the
and then press the
- Edit an appropriate NTP Server Address (IP
or FQDN) and then press the "OK" soft
key.
NTP Server
time.xxxx.com
ab
Please
TIP
administrator to retrieve your NTP
Server Address.
You can reach the NTP Server
TIP
menu by pressing the following
keys.
To go to the NTP Server menu:
51
key while in Standby mode.
key to select "5.Setting" and
key.
key to select "1.User Setting"
key.
key to select "7.Date & Time"
key.
key to select "6.NTP Server"
key.
OK Clear
contact your network