Vlan Setting; Dns Setting; Ntp & Time; Daylight Saving - NEC GT200 User Manual

VLAN Setting

To configure the VLAN setting, press the SELECT key to access the submenu options and perform necessary functions.
1.
Press the SELECT key to enter the VLAN setting submenu options.

Switch：Select this option to enable/ disable VLAN connection.

Identifier：Select this option to set up VLAN settings ID.

Priority：Select this option to set the priority level (0-7).
2.
Use the UP and DOWN keys to select and set the VLAN settings.
3.
Press the MENU/EXIT key, then use the UP and DOWN keys to switch from YES/NO. Press SELECT again to
confirm or cancel and return to the previous menu level.

DNS Setting

Use to enter the IP address of DNS server(s). A maximum of 2 DNS servers can be entered. To enable the function:
1.
Press the SELECT key to enter the submenu.
2. Use the up and down arrow keys to select Primary and Secondary DNS.
3.
Press the MENU/EXIT key, then use the UP and DOWN keys to switch from YES/NO. Press the SELECT key
again to confirm or cancel and return to the previous menu level.
Note: DNS setting is only available when using the static IP setting. DNS setting is not available when the PPPoE or DHCP
IP setting is selected.
NTP & Time
The NTP & Time Setting allows you to configure the date and time of the VoIP phone manually or synchronize the clock with
the NTP (Network Time Protocol) server, and specify the time zone you are in. The NTP function should be disabled if you
want to set the date and time manually.
Select this option to enable/ disable NTP server connection.
Note: SV systems cannot be used as the NTP server.

Daylight Saving

To set the Daylight Saving feature:
1. Press the SELECT key to enter the submenu.
2.
Input the start month, start week, start day, start time, end month, end week, end day, and end time.
3.
Select Switch to enable or disable this function and press the SELECT key to confirm.
4. Press the MENU/EXIT and use UP and DOWN keys to switch from YES/NO. Press the SELECT key again to
confirm or cancel and return to the previous menu level.
Save & Restart
Select this option to save settings and restart the network.
S I P S e t t i n g s
S I P S e t t i n g s
System Settings enables you to configure the phone system.
Port Setting
Enter the SIP port number and the RTP port number provided by your ITSP or MIS.
Chapter 3 MMI Configuration
14