LAN Port Settings
1.
To configure IP settings through the web browser:
2.
Click Network, LAN Port Settings. The following screen will be displayed.
Static IP
To configure Static IP settings:
1.
Select Static IP in IP Type.
2.
The following fields are enabled for user input. Enter the required information.
IP Address: Enter the IP address.
Netmask: Enter Net Mask.
Gateway: Enter the Gateway IP.
Primary DNS: Enter the primary DNS server.
Secondary DNS: Enter the secondary DNS server. Network connects to this server in case the primary
DNS server is not available.
Mac Address: Enter the Mac address.
3.
Click Submit to save your settings or Reset to cancel.
PPPoE
To configure PPPoE settings:
1.
Select PPPoE in IP Type.
2.
The PPPoE Setting section is enabled for user input. Enter the required information.
Username: Enter user name.
Password: Enter the password of PPPoE settings.
Keep Alive Mode: Select option, Ping DNS1 or Ping Remote IP.
Remote IP: Enter remote IP address.
3.
Click Submit to save your settings or Reset to cancel.
Chapter 4 Web Configuration
33