Factory Defaults
You can reset all the settings on the VoIP phone to factory default settings.
1.
Click System Settings, Factory Defaults. The following screen will be displayed.
2.
Click Submit.
3.
A confirmation message appears, click OK to proceed with reset, the system will automatically reboot. Click
Cancel to cancel reset.
Reboot
To reboot the VoIP phone manually:
1.
Click System Settings, Reboot. The following screen will be displayed.
2.
Click Reboot.
3.
A confirmation message will appear, click OK to proceed with reboot. Click Cancel to cancel reboot.
G
l
o
b
a
l
S
I
P
S
e
G
l
o
b
a
l
S
I
P
S
e
The Global SIP settings allow you to configure the port and Codec priority and signal or voice precedence settings.
Port Settings
This setting menu is only accessible through the web browser. To configure the port setting:
1.
Click Global SIP Settings, Port Settings. The following screen will be displayed.
2.
Enter the SIP Listen Port number and the RTP Port Base number provided by your ITSP or MIS.
3.
Click Submit to save your settings or Reset to cancel.
Note: Unless requested, Port Settings do not require modification.
Chapter 4 Web Configuration
t
t
i
n
g
s
t
t
i
n
g
s
27