Installing And Starting The Control Programs; Installing The Programs - Extron electronics DTP CrossPoint 108 4K Setup Manual

Installing and Starting the Control Programs

The following programs are available on the Extron website:
Digital Signal Processor (DSP) Configurator program —
Required for full operation of switcher DSP functions. It also
provides some limited control of the switcher non-DSP functions.
See the DTP CrossPoint 4K Series User Guide and the program
Help file for more information.
Product Configuration Software (PCS) — Configures the video
functions of the switcher, including creating video and audio ties
saving logos. Also provides control of audio line input gain and
attenuation, output attenuation and muting, audio input format
(analog, digital, or auto), and output audio source (DSP or original
[embedded]).
Run either program from a Windows-based computer connected to
an AV LAN port (IPCP models) or the LAN port (non-IPCP models)
R
( or
NOTES:
•
•
28 DTP CrossPoint 4K Series • Remote Control
Q
on page 10) or USB port (
For details on operating the program, see the
DTP CrossPoint 4K Series User Guide.
The DSP Configurator program has a software switch that
allows you to lock out audio adjustments in the Product
Configuration Software, making them unavailable for
selection.
A
on page 16).