Table of Contents
Advertisement
Operation Safety
O
PERATION
S
AFETY
26
<Book title goes here>
Warning
To prevent the SCOPIA Elite 5200 Series MCU platform from
overheating, do not operate it in an area that exceeds the maximum recommended
ambient temperature of 113°F (45°C). To prevent airflow restriction, allow at least
3 inches (7.6 cm) of clearance around the ventilation openings.
Microprocessor heatsinks may become hot during normal operation. To avoid
burns, do not allow anything to touch processor heatsinks.
When removing the fan tray, keep your hands and fingers away from the
spinning fan blades. Let the fan blades completely stop before you remove the
fan tray.
Warning
There is a danger of explosion if the ATCA board battery is incorrectly
replaced. Replace with the same type, or an equivalent type recommended by the
manufacturer. Dispose of used batteries only according to manufacturer
instructions.
Ultimate disposal of this product should be handled according to all national laws
and regulations.
Cables for connecting to the unit RS-232 and Ethernet interfaces must be UL
certified type DP-1 or DP-2 (when residing in a non-LPS circuit).
Advertisement
Table of Contents
