Table of Contents
Advertisement
How to Rack Mount the MCU
A
TTACHING THE
S
G
YSTEM
ROUND
16
<Book title goes here>
Figure 2-6
SCOPIA Elite MCU Chassis
Procedure
Lift the SCOPIA Elite MCU chassis according to the instructions in the
1
Chassis Lifting Guidelines
Ensure the front of the chassis faces front and place the chassis on the
2
shelf brackets.
3
Secure the chassis to the rack posts through the holes in the integral
mounting brackets. Make sure to use all the screws provided to secure
the chassis to the rack posts.
Before connecting power or turning ON power to the MCU, it strongly
recommend that you provide an adequate chassis ground (earth) connection for
the chassis.
You must use size AWG 18 (1 mm2) or larger wire, and an appropriate
user-supplied ring terminal.
This equipment must be grounded. Never defeat the ground conductor
Warning
or operate the equipment in the absence of a suitably installed ground conductor.
Contact the appropriate electrical inspection authority or an electrician if you are
uncertain that suitable grounding is available.Connect the AC power receptacle to
the AC power source with the provided power cable.
section on page 14
Advertisement
Table of Contents
