Setting The Clock; Setting The Lights - Thermador DM301 Care And Use Manual

Oven Operations
To Cancel an Active Timer:
Select TIMER 1 OFF or TIMER 2 OFF.
To Set Both TIMER 1 and TIMER 2:
• Follow the steps above to set each Timer. The Timer with the least amount of countdown time has display priority. The countdown
display for the second timer is shown automatically when the first timer has ended.
The words "TIMER 1" and "TIMER 2" are both displayed along with the number countdown.
•
The designation, "TIMER 1" or "TIMER 2" with the least remaining countdown time is more brightly lit than the other word.
•
During the countdown, touch CLOCK or TIMER. Depending on the pad touched, either the time of day or the remaining time is
•
briefly displayed.
To Change a Timer:
1. Touch TIMER 1 or TIMER 2.
2. Enter the new desired time.
3. Touch the START pad.
• Always set the clock after installation or after a power failure.
Once power returns to the oven, the clock displays the time of
day when power was turned off or lost.
• The Time of Day clock can be set while an automatic timed
cooking mode is in operation.
• If 10 seconds elapse between touching the clock pad or number
pads, the oven will beep two times as a reminder.
• After 5 more seconds, the clock pad will stop flashing and the
original time will be displayed.
• Touch OVEN LIGHT pad once to turn light on or off.
• The lights do not operate in the Self Clean mode.
Setting the Timer
(Continued from previous page)

Setting the Clock

To Set the Clock:
1. Touch the CLOCK pad.
2. Set the current time of day.
3. Touch START or CLOCK.

Setting the Lights

10
Built-in DM Oven Care and Use Manual
Message scrolls in display:
Enter Time of Day then touch START
Message scrolls in display:
Enter Time of Day then touch START