Table of Contents
Advertisement
Maintenance
Note:
Determine the left and right sides of the
machine from the normal operating position.
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
After the first 2 hours
After the first 10 hours
Before each use or daily
Every 50 hours
Every 400 hours
Daily Maintenance Checklist
Duplicate this page for routine use.
Maintenance Check Item
Check Grass Deflector in
Down Position (if applicable)
Check Tire Pressure
Check Condition of Blades
Lubricate All Grease Fittings
Touch-up Damaged Paint
1. Immediately after every washing, regardless of the interval listed.
Notation for Areas of Concern
Inspection performed by:
Item
Maintenance Procedure
• Tighten the castor wheel nuts.
• Tighten the castor wheel nuts.
• Torque the blade bolts.
• Lubricate the castor arm bushings.
• Lubricate the castor wheel bearings.
• Check the blades.
• Clean the cutting unit.
• Lubricate the grease fittings. Lubricate the grease fittings immediately after every
washing.
• Check the gearbox lubricant.
• Tighten the castor wheel nuts.
• Torque the blade bolts.
• Check the blade drive belt adjustment.
• Clean under the cutting unit belt covers.
• Change the gearbox lubricant.
For the week of:
Mon.
Tues.
1
Wed.
Thurs.
Date
Information
16
Fri.
Sat.
Sun.
Advertisement
Table of Contents
