Repacking A Device - Siemens 7XV545 Product Information

Product Information
Communication Converters
Cleaning
Switch off the device. Clean the device with a clean, dry and soft cloth. Do not use solvents

Repacking a Device


If you store devices after incoming inspection, pack them in suitable storage packaging.

If devices are to be transported, pack them in transport packing.

Put the accessories supplied and the test certificate in the packing with the device.
Storage

Store the device in a dry and clean location.

The relative air humidity must not lead to condensation or ice formation.

To avoid premature aging of the electrolytic capacitors, store the device within the recommended temperature range of +10 °C to +35 °C (+50 °F
to +95 °F).

If the device is stored for an extended period of time, Siemens recommends to connect the device to the supply voltage for 1 or 2 days once a
year to reform the electrolytic capacitors in the device. This procedure should also be carried out before operating the device.
Transport

If devices are to be shipped elsewhere, you can reuse the transport packaging. When using different packaging, you must ensure that the
transport requirements according to ISO 2248 are adhered to. The storage packing of the individual devices is not adequate for transport
purposes.
Unrestricted Product Information
C53000-X1150-C601-2,
7XV545, 7XV565, 7XV58
12
Edition 02.2018