Teledyne 3160 Operating Instructions Manual page 52

4 Operations 4 Operations
4 Operations 4 Operations 4 Operations
4-24
7. Status page five shows the time and date of the last time
the alarm was triggered for each of the five program-
mable alarms.
8. Status page six shows the set-up for the serial port, and
allows you to reconfigure the serial port. Press EDIT to
bring up the following screen.
Press NEXT to go to status page 7.
9. Use the SELEC, UP and DOWN keys to select the de-
sired serial port configuration, and press ACCPT.
Baud rate: Baud rate: Baud rate:
Baud rate: Baud rate:
Parity: Parity:Odd, Even, or None Parity:
Parity: Parity:
Mode: Monitor, Remote, or Off Mode: Mode: Mode: Mode:
ASCII Data Bits: ASCII Data Bits: 7 or 8 ASCII Data Bits: ASCII Data Bits: ASCII Data Bits:
Stop Bits: 1 or 2 Stop Bits: Stop Bits:
Stop Bits: Stop Bits:
Modem: On, Off or Auto Modem: Modem:
Modem: Modem:
Output Interval for Monitoring: Output Interval for Monitoring: Output Interval for Monitoring:
Output Interval for Monitoring: Output Interval for Monitoring:
Transmit/Receive Line Terminators: Transmit/Receive Line Terminators: CR or Transmit/Receive Line Terminators:
Transmit/Receive Line Terminators: Transmit/Receive Line Terminators:
10. Status page seven allows for configuration of the mo-
dem/remote. Press EDIT to change the configuration.
•
•
•
•
•
11. After pressing EDIT, a cursor will appear and you will
be able to edit the settings. Press ACCPT when done.
Pressing INIT in status page seven (step 10) takes you
to the screen at the top of the next page and gives you
the option of either checking for a modem, or setting up
the modem. Set-up sets up the modem for auto answer
and other communication protocols.
TELEDYNE ANALYTICAL INSTRUMENTS
300–2400
CRLF
Modem Mode Modem Mode: AUTO/OFF/ON Modem Mode Modem Mode Modem Mode
Modem Status: NO (set by system) Modem Status Modem Status Modem Status Modem Status
Login Access: LOCAL (set by system) Login Access Login Access Login Access Login Access
Phone Jack Phone Jack: SINGLE/MULTI, RJ12 Phone Jack
Phone Jack Phone Jack
Comm. Std. for 1200B Comm. Std. for 1200B: BELL USA/CCITT Comm. Std. for 1200B
Comm. Std. for 1200B Comm. Std. for 1200B
1–32000 sec.