Teledyne 3160 Operating Instructions Manual page 39

Select Active Sensor (T Select Active Sensor (T Select Active Sensor (Tw w w w w o Cells Onl Select Active Sensor (T Select Active Sensor (T
1. Enter set-up from the Analyze mode main menu by
pressing SETUP.
If only one cell block is installed, the TEST and INSTL
options on the next screen are omitted.
2. Press SET to change the active sensor.
3. Enter your authorization code by using the SELEC, UP
and DOWN keys, and press ACCPT.
4. Press SENSR. (This option will not appear if only one
sensor block is installed.)
5. Select sensor A or B.
6. The main Analyze mode menu will appear, and will indi-
cate the chosen sensor.
TELEDYNE ANALYTICAL INSTRUMENTS
o Cells Onl o Cells Onl o Cells Only) y) y) y) y) o Cells Onl
Operations 4 Operations 4
Operations 4 Operations 4 Operations 4
4-11