Changing Passwords For Remote Monitoring And Control - Teledyne 3160 Operating Instructions Manual

Changing Passwords for Remote Monitoring and Control

Changing Passwords for Remote Monitoring and Control
Changing Passwords for Remote Monitoring and Control Changing Passwords for Remote Monitoring and Control Changing Passwords for Remote Monitoring and Control
TELEDYNE ANALYTICAL INSTRUMENTS
1. Enter set-up from the Analyze mode by pressing
SETUP.
2. Press SET to set the password(s).
3. Enter your authorization code by using the SELEC, UP
and DOWN keys, and press ACCPT. You must enter
the same authorization code set during the last COLD
START.
4. Press MORE. Press ESC to return to the Analyze mode
main menu.
5. Press PASS1 to change the remote monitoring pass-
word, or PASS2 to change the remote control pass-
word.
6. If you pressed PASS1 in step 5, the next screen will al-
low you to change the remote monitoring password.
Use SELEC, UP and DOWN to choose the new pass-
word, and then press ACCPT, which will take you to
step 4.
Operations 4 Operations 4
Operations 4 Operations 4 Operations 4
4-21