Drill Master XP User Manual page 40

f) Do no overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations. Nonslip footwear is recommended.
g) Dress properly. Wear closed, non-flammable protective
clothing. Do not wear loose clothing or jewelry. Keep your
hair, clothing and gloves away from moving parts. Loose
clothes, jewelry or long hair can be caught in moving parts.
h) Secure Work. Use clamps or a vise to hold work when
practical. It's safer than using your hand and it frees both
hands to operate tool.
4. Power Tool Use and Care
WARNING! Use recommended accessories. Use the power
tool, accessories, abrasives, and tool bits etc., in accordance with
these instructions, taking into account the working conditions
and the work to be performed. Use of the power tool for operations
different from those intended could result in a hazardous situation.
CAUTION! Keep power tools and work space clean for best
performance and safety. Do not let sharpening debris accumulate
on, in, or around the tool. Accumulated fine metal sharpening
debris can be very hot and may present a fire danger if the machine
or your workspace is not properly cleaned and maintained.
Accumulated sharpening debris can also degrade the life of the
tool and cause premature wear on some components. If sharpening
debris has accumulated, do not immediately throw it into a trash
receptacle without ensuring the debris is completely cool and
free of heat. Improperly disposing of the accumulated sharpening
debris may present a fire risk. Do not collect the sharpening debris
during sharpening. This increases the risk of heat build-up in the
debris and the potential for fire.
a) Do not force the power tool or attachment. Use the correct
power tool for your application. Do not force small tools to do
the job of a heavy duty tool. The correct power tool will job
better and safer at the rate for which it is designed.
b) Use the right tool. Do not force tool or attachment to do a job
for which it is not designed.
c) Do not use the power tool if the switch does not turn it on or
off. Any power tool that cannot be controlled with the switch
is dangerous and must be repaired.
d) Never leave tool running unattended – Turn power off. Do
not leave the tool until it comes to a complete stop.
e) Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power tools.
Such preventative safety measures reduce the risk of
starting the power tool accidentally.
38 www.drilldoctor.de