Drill Master XP User Manual page 39

Hide thumbs Also See for XP:
Table of Contents

Advertisement

Available languages

Available languages

USA Only
This tool is intended for use on a circuit that has an outlet
that looks like the one illustrated in Fig. A. It has a grounding
plug that looks like the one in Fig. B. A temporary adapter,
which looks like the adapter illustrated in Fig. C & Fig. D,
may be used to connect this plug to a 2-pole receptacle as
shown in Fig. D if a properly grounded outlet is not available.
The temporary adapter should be used only until a properly
grounded outlet can be installed by a qualified electrician.
The green-colored rigid ear, lug, and the like, extending from
the adapter must be connected to a permanent ground such
as a properly grounded outlet box.
Cover of Grounded
Outlet Box
Fig. A
3. Personal Safety:
Sharpening operations can create hot sparks and metal debris,
loud noises and dust.
a) Stay alert - watch what you are doing and use common sense
when operating a power tool. Do not use a power tool while
you are tired or under the influence of drugs, alcohol or
medication. A moment of inattention while operating power
tools may result in serious personal injury.
b) Use personal protective equipment (PPE). Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard
hat or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Use ear protection during use.
generate in excess of 85 dB(A) noise emissions when in
operation.
d) Prevent unintentional starting. Ensure the switch is in the
off-position before connecting to power source and/or battery
pack, and when picking up or carrying the tool. Carrying
power tools with your finger on the switch, or energizing
power tools that have the switch on invites accidents.
e) Remove any adjusting key or wrench before turning the
power tool on. A wrench or a key left attached to a rotating
part of the power tool may result in personal injury.
www.drilldoctor.de
Grounding Pin
Fig. B
Cover of Grounded
Outlet Box
Adapter
Metal Screw
Grounding Means
Fig. C
Drill Doctor
Fig. D
®
unit can
37

Advertisement

Table of Contents
loading

Table of Contents