Making A Recording; Recording On A Tape Deck Or Vcr - Technics SA-DA10 Operating Instructions Manual

A
1
2
VCR 2
VCR 3
B
TAPE MONITOR
48
RQT5518
1
TAPE MONITOR
INPUT SELECTOR

Making a recording

2
Note
¡You cannot record a source connected through a digital
terminal.
¡When recording CD, DVD, or TV, ensure the source is connected
through the corresponding analogue terminals (a pages 10–12)
and "ANALOG" input is selected (a page 22).
¡When you select DVD 6CH INPUT mode, only sound from the
front left and right channels is recorded.

Recording on a tape deck or VCR

A
You can record to a tape deck connected to TAPE REC (OUT) or
to a VCR connected to VCR 1 OUT.
VCR 3
See the recording unit's operating instructions for details on how
to prepare it for recording.
When recording with a tape deck, you can record any source
except TAPE.
When recording with a VCR, you can record any source except
TAPE or VCR 1.
Note
Recording from the tape deck to the VCR is not possible.
1
Turn [INPUT SELECTOR] to select the
source to be recorded.
2
If you selected VCR 2 in step 1, set
[
position.
3
Begin recording.
Follow your recording unit's operating instructions.
4
Begin the source to be recorded.
Follow your equipment's operating instructions.
B
To monitor sound being recorded onto a tape deck
It is possible to check the sound being recorded if your tape deck
is a 3 head system.
Press [TAPE MONITOR] on this unit and
set the monitor button on the tape deck to
"TAPE".
Press [TAPE MONITOR] once again to turn it off.
For your reference
Use the VCR 3 terminals on the front of the unit when dubbing
from a video camera.
VCR 2, VCR 3] to the required